Lesson 2: Transfer Functions and Impulse Responses

Objective:

This lesson explains the mathematical foundations of room measurements, helping you understand what transfer functions and impulse responses truly represent.

Transfer Function Analysis:

A transfer function describes how a system changes both amplitude and phase of input signals. In REW, focus on:

1. Frequency Response

The magnitude component showing how amplitudes are modified across frequencies.

2. Phase Response

The phase component showing timing shifts across frequencies.

Minimum phase systems have the lowest possible phase shift for their magnitude response. Most speaker drivers approximate minimum phase behavior.

Room responses are mixed-phase, combining minimum and non-minimum phase characteristics. Excess phase is the difference between measured phase and what would be expected for a minimum phase system.

Identify minimum-phase regions by looking for flat excess group delay in the phase graph.

Impulse Response Fundamentals:

  1. Impulse responses represent the system's reaction to an impulsive signal (like a click).
  2. REW measures impulse responses using logarithmic sweeps, with the IR calculated via inverse FFT.
  3. Key features in an impulse response:

IR Windowing Techniques:

REW offers three windowing options:

Practical Applications:

The relationship between transfer functions and impulse responses is fundamental:

This relationship allows you to:

  1. Convert between time and frequency domains
  2. Analyze both amplitude and timing characteristics
  3. Apply windowing in either domain for focused analysis

Spectrograms and Waterfalls:

These 3D plots show how frequency content changes over time.

Spectrogram View:

Waterfall View:

Shows frequency response slices over time with decay patterns.

Burst Decay:

Specialized waterfall mode comparing resonance bandwidths (Q factors) across frequencies.

Quiz: Transfer Function Concepts

  1. What is the relationship between an impulse response and transfer function?
  2. Why is windowing important in impulse response analysis?
  3. What does excess group delay indicate?

Return to Lesson Index